Uv Vector Network Radio Analyzer 5000ma Battery Demo Kits
SKU #6897032855588
Typ: Communication Radio Accessories
Dostupnosť: Na sklade
Ceny od: $ 227.99
DOPRAVA DOPRAVA ZADARMO NA CELOM SVETE
Features:
4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes;
All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy;
The body size is 125mm*75mm*20mm, compact and portable;
The radio frequency interface is SMA, which is convenient for connecting all kinds of DUTs;
5000mAh large-capacity lithium battery, battery life up to 7 hours;
Full touch screen design, with 3 side buttons at the same time, flexible and convenient operation;
Support Chinese and English interface;
Optimized UI design, convenient for users to perform measurement operations;
Support screen brightness adjustment;
The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable;
Standard high-quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy;
A USB power output interface is designed to support 5V/1A power output;
Using 2A high current charging IC, the charging time is shorter;
Supporting host computer software, the host computer supports Chinese and English interfaces;
The screen image of the device can be obtained by taking a screenshot of the host computer;
Specifications:
Frequency range:
50kHz-3GHz
RF output power:
-9dBm (error within 1GHz:
±1dB)
Frequency accuracy:
<0.5ppm
S21 dynamic range:
70dB (1.5GHz), 60dB (3GHz)
S11 dynamic range:
50dB (1.5GHz), 40dB (3GHz)
2-port return loss:
20dB typ (1.5GHz), 13dB min (3GHz)
Number of calibration points:
101 points
Number of scanning points:
101 points
Number of traces:
4
Number of mark points:
4 (the mark point bar can be moved up and down on the screen)
USB interface:
USB Type-C communication mode:
CDC (serial)
?Package:
Host x1
SMA open calibration kit x1
SMA short-circuit calibration kit x1
SMA 50? load calibration kit x1
SMA-KK double head female hole adapter x1
SMA-JJ double-head male pin adapter x1
SMA-JKW elbow outer screw inner hole to inner screw inner needle adapter x1
20cm SMA-JJ RG405 RF cable x2
USB type-C data cable x1
Stylus x1
Produkt nezodpovedá popisu? Kontaktujte nás do 30 dní od prijatia!
V prípade zrušenia budú peniaze vrátené na váš účet do 3 dní.
4.3-inch IPS LCD display, resolution 800*480, ultra-wide viewing angle, long-term use does not hurt your eyes;
All aluminum alloy case, sturdy and durable, effectively shielding electromagnetic interference to ensure measurement accuracy;
The body size is 125mm*75mm*20mm, compact and portable;
The radio frequency interface is SMA, which is convenient for connecting all kinds of DUTs;
5000mAh large-capacity lithium battery, battery life up to 7 hours;
Full touch screen design, with 3 side buttons at the same time, flexible and convenient operation;
Support Chinese and English interface;
Optimized UI design, convenient for users to perform measurement operations;
Support screen brightness adjustment;
The firmware can be upgraded through a virtual U disk, no programmer is needed, and the firmware can be upgraded through the included USB type-c data cable;
Standard high-quality calibration parts and RG405 phase-stable cable to ensure calibration accuracy;
A USB power output interface is designed to support 5V/1A power output;
Using 2A high current charging IC, the charging time is shorter;
Supporting host computer software, the host computer supports Chinese and English interfaces;
The screen image of the device can be obtained by taking a screenshot of the host computer;
Specifications:
Frequency range:
50kHz-3GHz
RF output power:
-9dBm (error within 1GHz:
±1dB)
Frequency accuracy:
<0.5ppm
S21 dynamic range:
70dB (1.5GHz), 60dB (3GHz)
S11 dynamic range:
50dB (1.5GHz), 40dB (3GHz)
2-port return loss:
20dB typ (1.5GHz), 13dB min (3GHz)
Number of calibration points:
101 points
Number of scanning points:
101 points
Number of traces:
4
Number of mark points:
4 (the mark point bar can be moved up and down on the screen)
USB interface:
USB Type-C communication mode:
CDC (serial)
?Package:
Host x1
SMA open calibration kit x1
SMA short-circuit calibration kit x1
SMA 50? load calibration kit x1
SMA-KK double head female hole adapter x1
SMA-JJ double-head male pin adapter x1
SMA-JKW elbow outer screw inner hole to inner screw inner needle adapter x1
20cm SMA-JJ RG405 RF cable x2
USB type-C data cable x1
Stylus x1
ZÁRUKA
Ak položka nebola doručená do 40 dní po zakúpení, vrátime vám peniaze. Na vrátenie peňazí máte 2 týždne - do 60. dňa.Produkt nezodpovedá popisu? Kontaktujte nás do 30 dní od prijatia!
V prípade zrušenia budú peniaze vrátené na váš účet do 3 dní.
RECENZIE
Excellent Took Only 12 Days From China, The Best NanoVna, I Recommend 100% To The Seller 29 Sep 2021 02:14
U***r from URUGUAY