Spot Welding Machine Diy Spot Welder
SKU #6609176231972
Тип: Welding Accessories
Доступность: В наличии
Цены начиная с: $ 77.99
БЕСПЛАТНАЯ ДОСТАВКА ПО ВСЕМУ МИРУ
Features:
After receiving the product, please charge it fully before using it to get the best results.
This machine can weld 0.1-0.15mm nickel steel sheet and 0.1 pure nickel sheet. It is not to weld pure copper materials with strong conductivity.one full charge can complete the welding of hundreds of solder joints.
This is equipped with 3.7V, 5500MAh lithium battery. After the single-chip microcomputer detects that the soldering pen touches the nickel sheet, it controls the "MOS" to turn on.
Since the resistance of the soldering pen contacting the nickel sheet is much greater than that of other parts of the loop, most of the energy is concentrated here.
The way of heating, the nickel sheet is Consumed, and the nickel sheet is welded to the battery.
When the product is not used for a long time, the battery power should not be kept too low or too high. If the power consumption is too low, the machine will not work and the charging light will not turn on. When this happens, please charge it, and it will recover after tens of minutes.
Current, voltage, and materials can affect the spot welding effect. Not all materials can get a good spot welding effect. What can now be adjusted is the spot welding time and contact strength. It is recommended to practice hands with iron cans first, and then solder the battery after getting familiar with the welding machine.
[Low Standby Power Consumption]:
Long press the spot welding for 3 seconds, the buzzer sounds to complete the on/off operation, low power consumption soft and hard design, the measured current of a few ?A when off, low power consumption in standby mode.
The product is equipped with a charging cable and no charger head. Please use a charging head with a fixed 5V output for charging.
Do not use a fast charging head, otherwise the battery may be damaged.
Specifications:
Size:
142*82*40mm
Package includes:
1*spot welding machine
2*Soldering pen
1*charging cable
1*Nickel belt
2*Rubber sleeve
Товар не соответствует описанию? Свяжитесь с нами в течение 30 дней после его получения!
В случае отмены деньги будут возвращены на ваш счет в течение 3 дней.
After receiving the product, please charge it fully before using it to get the best results.
This machine can weld 0.1-0.15mm nickel steel sheet and 0.1 pure nickel sheet. It is not to weld pure copper materials with strong conductivity.one full charge can complete the welding of hundreds of solder joints.
This is equipped with 3.7V, 5500MAh lithium battery. After the single-chip microcomputer detects that the soldering pen touches the nickel sheet, it controls the "MOS" to turn on.
Since the resistance of the soldering pen contacting the nickel sheet is much greater than that of other parts of the loop, most of the energy is concentrated here.
The way of heating, the nickel sheet is Consumed, and the nickel sheet is welded to the battery.
When the product is not used for a long time, the battery power should not be kept too low or too high. If the power consumption is too low, the machine will not work and the charging light will not turn on. When this happens, please charge it, and it will recover after tens of minutes.
Current, voltage, and materials can affect the spot welding effect. Not all materials can get a good spot welding effect. What can now be adjusted is the spot welding time and contact strength. It is recommended to practice hands with iron cans first, and then solder the battery after getting familiar with the welding machine.
[Low Standby Power Consumption]:
Long press the spot welding for 3 seconds, the buzzer sounds to complete the on/off operation, low power consumption soft and hard design, the measured current of a few ?A when off, low power consumption in standby mode.
The product is equipped with a charging cable and no charger head. Please use a charging head with a fixed 5V output for charging.
Do not use a fast charging head, otherwise the battery may be damaged.
Specifications:
Size:
142*82*40mm
Package includes:
1*spot welding machine
2*Soldering pen
1*charging cable
1*Nickel belt
2*Rubber sleeve
ГАРАНТИЯ
Мы вернем вам деньги, если товар не будет доставлен в течение 40 дней после покупки. У вас есть 2 недели, чтобы запросить возврат - до 60-го дня.Товар не соответствует описанию? Свяжитесь с нами в течение 30 дней после его получения!
В случае отмены деньги будут возвращены на ваш счет в течение 3 дней.
ПОХОЖИЕ ПРОДУКТЫ
Round Y Plastic Speed Welding Tip Leister Vinyl Welder Tools Nozzle
FREE SHIPPING
Plasma Torch Height Controller Arc
FREE SHIPPING
Bent Curved Heat Nozzle For Quick 861dw Soldering Station
FREE SHIPPING
2-gun, Car Dent, Puller Body Removal Tool
FREE SHIPPING
200a Groud And Welding Earth Clamp Set
FREE SHIPPING
Gas Torch Adapter Camping Cookware Household Outdoor Flame Gun Accessories
FREE SHIPPING
Blue Light Laser Head For Master Series, Carving Engraving Machine Tools
FREE SHIPPING
Lg-40 Pt-31 Plasma Cuter, Consumables Extended Nickel-plated Cut-40 Ct-312
FREE SHIPPING
Tig Solder Cable Board Connectors-plugs And Sockets, Dinse Quick Fitting
FREE SHIPPING
Manual Welder- Ground Clamp Copper, Welding Earth Clip
FREE SHIPPING
Apparatus Welding, Plastic Pipes
FREE SHIPPING
Roller Guide Wheel Spacer Plasma Cutting Torch Guider
FREE SHIPPING
Air Plasma Cutter Extend Consumables Fit Cut
FREE SHIPPING
50pcs- Plasma Cutter Torch, Consumables Electrode, Nozzles Cups Kit
FREE SHIPPING
Melt Machine Ppr/pe Fuser Melt-butt Welder
FREE SHIPPING
20pcs Welding Nozzle-copper Contact Tips
FREE SHIPPING
Grounding Argon, Arc Clamp For Welding Machine
FREE SHIPPING
Quality Spacer Guide For Air Plasma Cutter Cutting
FREE SHIPPING
Tig Welding Torch Kit Glass Cup Collet Gas Lens Nozzle
FREE SHIPPING