6/10 Port 6gbps Sata 3.0 Pcie Card
6 reviews
SKU #6924359663652
Typ: Riser Cards
Dostupnost: Na skladě
Ceny od: $ 74.39
DOPRAVA DOPRAVA ZDARMA NA CELÉM SVĚTĚ
Features:
Compliant with Serial SATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
Compliant with PCI-Express v2.0 specifications, backward compatible with PCI-Express v1.0.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support AHCI1.0 mode and IDE mode.
Support for native command queue (NCQ).
Support FIS switch or command switch based on port multiplier.
Support hot swap and hot swap.
Compatible with SATA6G, 3G and 1.5G hard drives.
Specifications:
Type:
PCI-E Riser
Package:
Yes
Bus interface:
PCI-Express x1 slot
Expansion interface:
10 ports SATA3.0 interfaces
System requirements:
There is an available PCI Express X1 slot, which also supports PCI-E X2 X4 X8 X16
Operating system:
Windows 10/8/ (32/64 bit) / Vista (32/64 bit) / 2003/2008 / Linux
Package Include:
1 * SATA 3.0 expansion card
1 * Low bracket
10 * SATA cable
Produkt neodpovídá popisu? Kontaktujte nás do 30 dnů po obdržení!
V případě zrušení budou peníze vráceny na váš účet do 3 dnů.
Compliant with Serial SATA 3.0 specification, backward compatible with SATA2.0 SATA1.0.
Compliant with PCI-Express v2.0 specifications, backward compatible with PCI-Express v1.0.
Supports communication speeds of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps.
Supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support AHCI1.0 mode and IDE mode.
Support for native command queue (NCQ).
Support FIS switch or command switch based on port multiplier.
Support hot swap and hot swap.
Compatible with SATA6G, 3G and 1.5G hard drives.
Specifications:
Type:
PCI-E Riser
Package:
Yes
Bus interface:
PCI-Express x1 slot
Expansion interface:
10 ports SATA3.0 interfaces
System requirements:
There is an available PCI Express X1 slot, which also supports PCI-E X2 X4 X8 X16
Operating system:
Windows 10/8/ (32/64 bit) / Vista (32/64 bit) / 2003/2008 / Linux
Package Include:
1 * SATA 3.0 expansion card
1 * Low bracket
10 * SATA cable
ZÁRUKA
Pokud položka nebyla doručena do 40 dnů po zakoupení, vrátíme vám peníze. Na vrácení peněz máte 2 týdny - do 60. dne.Produkt neodpovídá popisu? Kontaktujte nás do 30 dnů po obdržení!
V případě zrušení budou peníze vráceny na váš účet do 3 dnů.
RECENZE
I Took The Version Of 10Port 1X, Drove To Tyumen In Three Weeks, The Packing Is Good. I Did Not Turn On From The Box, I Got On An Endless Windows Load, So I Explain How To Run. First, Without The Installed Card, Put The Driver From The Disk. If There Is No Optical Drive, Look In The Firewood Internet For The Asm1062 Controller, At The Time Of Writing The Review The Latest Version 3.3.5. The Most Important Thing: In Addition To The Above Controller, The Board Is Equipped With Two JMicron Jmb575 Multiplexers, Which Divide One Sata Connection Into Five. These Pepyaks Do Not Work Without Load, So If You Too Encounter An Endless Download Of Windows After Rebooth, Connect At Least Two Disk Drives To The Card. I Put Them In Sata1 And Sata6 Connectors, So That Each Multiplexer Received On The Disk. And It Started. I Attach A Photo Of The Dusty Interior. 05 Oct 2021 01:41
A***v from RUSSIA
It Is As Description, Thanks 02 Oct 2021 00:14
L***i from VIETNAM
Turned On, Earned Immediately, On 2 Screws Did Not Notice Problems. 22 Jan 2022 06:27
A***k from RUSSIA
30 Oct 2021 05:52
V***v from RUSSIA
21 Oct 2021 05:07
H***i from RUSSIA
So Far I Connected 4 Discs, They Work Stably, CrystalDiskInfo Is Determined Correctly. 10 Jan 2022 08:56
R***n from RUSSIA