24v, 12a 300w High Power Dual Dc Motor Drive Module Board
SKU #6536491040804
Tip: Circuit Development Boards
Dostupnost: Na lageru
Cijene počevši od: $ 65.99
BESPLATNA BESPLATNA DOSTAVA PO SVIJETU
24V Motor Driver Board 12A 300W High Power Dual DC Motor Drive Module H Bridge Better than L298n BTS7960 10A for Arduino DIY Car.
FEATURES:
This module not only has strong performance, but also has excellent protection. The module has built-in over-voltage, under-voltage, and over-temperature protection circuits.
As long as the voltage is too high, the voltage is insufficient, and the onboard temperature is too high, the protection measures will be triggered immediately to protect The status is output by the indicator in real time.
When it is on, it indicates normal operation
when it flashes fast, it indicates power supply over voltage; when it flashes slowly, it indicates power supply under voltage
when it flashes twice, it indicates that the drive is overheated; The possibility of damage under abnormal working conditions.
The control input terminals are 2.54mm pitch 2x5 double-row pins, which can be used directly on breadboards and prototype boards. It is very convenient to use and meets various DIY requirements.
SPECIFICATIONS:
Motor channel:
2
Input voltage:
6.5-28V DC
Control signal input voltage:
compatible with 3-5V
Control signal input current:
15mA (under 5V control signal voltage input)
PWM input frequency:
18-60KHz
PWM minimum pulse width:
2us
Peak current:
70A (maximum duration 100ms), the current will be limited as the temperature increases
Continuous current:
each channel can output 12A current continuously
Working temperature:
-25 ? ~ 85 ?
Overheating temperature:
85 ? ~ 95 ?
Size:
50mm * 50mm * 12.5mm
Over voltage:
28.5V
Under voltage:
6.3V
Built-in over-voltage, under-voltage and over-temperature protection circuits, indicated by STATE indicator flash
Proizvod ne odgovara opisu? Kontaktirajte nas u roku od 30 dana nakon što ga primite!
U slučaju otkazivanja, novac će biti vraćen na vaš račun u roku od 3 dana.
FEATURES:
This module not only has strong performance, but also has excellent protection. The module has built-in over-voltage, under-voltage, and over-temperature protection circuits.
As long as the voltage is too high, the voltage is insufficient, and the onboard temperature is too high, the protection measures will be triggered immediately to protect The status is output by the indicator in real time.
When it is on, it indicates normal operation
when it flashes fast, it indicates power supply over voltage; when it flashes slowly, it indicates power supply under voltage
when it flashes twice, it indicates that the drive is overheated; The possibility of damage under abnormal working conditions.
The control input terminals are 2.54mm pitch 2x5 double-row pins, which can be used directly on breadboards and prototype boards. It is very convenient to use and meets various DIY requirements.
SPECIFICATIONS:
Motor channel:
2
Input voltage:
6.5-28V DC
Control signal input voltage:
compatible with 3-5V
Control signal input current:
15mA (under 5V control signal voltage input)
PWM input frequency:
18-60KHz
PWM minimum pulse width:
2us
Peak current:
70A (maximum duration 100ms), the current will be limited as the temperature increases
Continuous current:
each channel can output 12A current continuously
Working temperature:
-25 ? ~ 85 ?
Overheating temperature:
85 ? ~ 95 ?
Size:
50mm * 50mm * 12.5mm
Over voltage:
28.5V
Under voltage:
6.3V
Built-in over-voltage, under-voltage and over-temperature protection circuits, indicated by STATE indicator flash
JAMSTVO
Vratit ćemo vam novac ako artikl nije isporučen u roku od 40 dana nakon kupnje. Imate dva tjedna da zatražite povrat novca - do 60. dana.Proizvod ne odgovara opisu? Kontaktirajte nas u roku od 30 dana nakon što ga primite!
U slučaju otkazivanja, novac će biti vraćen na vaš račun u roku od 3 dana.