4-in-1 Soil Moisture Meter Tester
SKU #6930267275437
Tip: Moisture Meters
Razpoložljivost: Na zalogi
Cene od: $ 32.39
BREZPLAČNA GOSPODARSTVA PO SVETU
Note:
Before using, please install 9V battery, remove the probe cover, and press OFF button for about 5 seconds to close the device.
Lighting measurement
Press the ON button to turn ON the instrument;
Light sensor window aligned to the highest light source;
The current light intensity will be displayed on the LCD screen;
Note:
1. do not block light or shadow light sensors
PH range measurement
Will be on the back of the [PH /?] button on the location of the PH.
The probe is inserted vertically into the soil and needs to be tested as soon as possible.
Press the ON button to start measuring.
The PH value of the test will be displayed on the LCD screen.
Measure it several times to get the exact value you need.
Note:
1. Insert the probe vertically at the edge of the plant stem in the middle.
2. Please gently push into the soil to avoid damaging the probe.
3. If the measured soil is too dry or fertile to measure the correct PH, the user can sprinkle some water and measure it again in half an hour.
Water measurement
Push back [PH /?] button to?.
Is inserted as vertically as possible into the soil.
Press NO to start measuring.
Test soil moisture will be displayed on the LCD screen.
Temperature measurement
When the humidity is measured, the soil temperature will be displayed on the LCD screen at the same time
[?/?OFF] button set humidity display is?or?.
Note:
If the user does not insert the probe into the soil, the correct ambient temperature of the outer space is displayed.
Izdelek se ne ujema z opisom? Pišite nam v 30 dneh po prejemu!
V primeru preklica bo denar vrnjen na vaš račun v roku 3 dni.
Before using, please install 9V battery, remove the probe cover, and press OFF button for about 5 seconds to close the device.
Lighting measurement
Press the ON button to turn ON the instrument;
Light sensor window aligned to the highest light source;
The current light intensity will be displayed on the LCD screen;
Note:
1. do not block light or shadow light sensors
PH range measurement
Will be on the back of the [PH /?] button on the location of the PH.
The probe is inserted vertically into the soil and needs to be tested as soon as possible.
Press the ON button to start measuring.
The PH value of the test will be displayed on the LCD screen.
Measure it several times to get the exact value you need.
Note:
1. Insert the probe vertically at the edge of the plant stem in the middle.
2. Please gently push into the soil to avoid damaging the probe.
3. If the measured soil is too dry or fertile to measure the correct PH, the user can sprinkle some water and measure it again in half an hour.
Water measurement
Push back [PH /?] button to?.
Is inserted as vertically as possible into the soil.
Press NO to start measuring.
Test soil moisture will be displayed on the LCD screen.
Temperature measurement
When the humidity is measured, the soil temperature will be displayed on the LCD screen at the same time
[?/?OFF] button set humidity display is?or?.
Note:
If the user does not insert the probe into the soil, the correct ambient temperature of the outer space is displayed.
GARANCIJA
Denar vam bomo vrnili, če artikel ni bil dostavljen v 40 dneh po nakupu. Za vračilo kupnine imate na voljo 2 tedna - do 60. dne.Izdelek se ne ujema z opisom? Pišite nam v 30 dneh po prejemu!
V primeru preklica bo denar vrnjen na vaš račun v roku 3 dni.