Digital Turbine Flowmeter Fuel Tester
2 reviews

Features:
Modular makes it suitable for use with output modules, sensors and remote transmitters.
Compact structure, easy to install.
Intuitive clear reading, high reliability, measuring accuracy is ±1%.
High-definition displays show both instantaneous and cumulative .
Can be widely used to measure , kerosene, gasoline, etc.

Specification:
Operating voltage: 2.3-3.3V
Battery type: 2 x AAA LRO3 batteries
Threadsize: 1inchNPT
Repetition: ±0.5%
Measure accuracy: ±1%
Maximum working pressure: 20BAR
range: 15-120L / Min
Single count: 0.00-9999.9
Total cumulative count: 0-99999
Mistakes count: 0.1000-9.9999
Working temperature: -10°C ~ +60°C(14°F~140°F)
Standby time: 1 year
Application: , kerosene, gasoline
Color: Red, Blue?leave a message,or we will send by random
Weight: 371g

Malfunction and solution:
The meter is not accurate.
1. The method of field calibration is not correct.
Calibrate again.
2. The rate on the meter is below the lowest.
Increase the rate.
3. The meter is blocked by the dry liquid.
Take out the impeller and it carefully and make sure the impeller turns freely.
4. The impeller is wrapped by the sealing material.
Remove the meter and make sure the impeller turns freely.
5. Too close to the impeller.
Install properly.
6. Too close to the motor or electronic noise environment
Install properly.
The reading numbers faded or blanked out.
1.Battery is exhausted or not connected
Check the batteries or even replace them.
rate is normal but the meter can not count. Press the button of DISPLAY, the meter starts.
1. Field calibration is not correct.
Calibrate again.
2. The impeller is blocked or damaged.
Remove the meter and make sure the impeller turns freely.
3.The impeller is wrapped by the sealing material.
Remove the meter and make sure the impeller turns freely.
rate is low and the meter can not count. Press the button of DISPLAY, the meter starts.
1. The meter is blocked by the dry liquid.
Take out the impeller, it carefully and make sure the impeller turns freely.
2. The rate on the meter is below the lowest.
Increase the rate.
The meter can not calibrate.
1. Circuit board is break down.
Replace the circuit board.
2. Button is fail to press.
Replace the circuit board.

Package List:
1 x meter
1x Manual
Note:Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

WARRANTY

We'll refund your money if the item hasn't been delivered within 40 days after purchase. You have 2 weeks to request a refund — until day 60.
Product doesn't match the description? Contact us within 30 days after you receive it!
In case of cancellation, money will be refunded to your account within 3 days.